SCUF Reflex (PS5) controller upgrades

We fit a base to each stick and supply a set of interchangeable caps in domed and concave shapes and different heights. The sticks are tested for centre and range with each cap fitted. You can swap caps on your SCUF Reflex (PS5) at home without tools.

We remove the original battery and fit a higher-capacity 4000 mAh cell that fits the existing space and connector. The charging circuit is checked and the controller is charged from empty to full to confirm it works with the larger cell. Your SCUF Reflex (PS5) goes back cycled and tested.

We remove the original potentiometer modules and fit TMR (tunnelling magnetoresistance) stick modules, which read the stick position with a magnetic sensor. Both sticks are centred and tested for range, dead zone and circularity. Your SCUF Reflex (PS5) keeps its original caps and feel.

We fit a board with tactile micro switches under the face buttons in place of the rubber membranes, giving a short travel and an audible click, like a mouse button. Each button is tested for registration and bounce on your SCUF Reflex (PS5) before we close it up.

We fit micro switches in place of the analogue trigger sensors, so each trigger registers a full pull after a few millimetres of travel with a tactile click. Both triggers are tested for clean registration on your SCUF Reflex (PS5). The triggers become digital, so games that use partial trigger pressure, such as racing games, read them as either off or fully on.

We swap the original modules for GuliKit TMR stick modules, set the tension to a neutral point and test both sticks for centre, range and circularity. We show you how to adjust the tension on your SCUF Reflex (PS5) once it is back with you.

We fit tactile micro switches under the face buttons and click switches in the triggers in a single strip down. Every input on your SCUF Reflex (PS5) is tested on a console before return. Triggers become digital, so games that use partial trigger pressure read them as fully on or off.